Accruepole Private Limited

RE-LC Loop Card for AVANI, intelligent addressable fire alarm control panel. Up to 254 devices can be connected to a single loop card. These loop card can plugged in to slot provided in the motherboard of Main panel (Avani). RE-LC Loop Card is compatible with Addressable Detectors, Manual Call Points, Modules etc., The status of the loop shown by dual colouor LED. 

UL Approved. Dual LED’s for 360 visibility. Advanced detection and communication protocol. Easy installation and maintenance. Sleek low-profile housing design. Regular 100mm base. Max. 254 Address setting through 8 way DIP switch.

The RE - 337 S addressable detectors are designed to work with Moniti O Panel. These detectors are low profile and have dual LED’s for 360 visual indication. The whereas the steady state indicates fire status. Detector addressing is electrically programmed into the detector at the time of installation. It has an unique chamber designed to sense smoke produced by wide range of sources of combustion. The detectors sensitivity can be programmed through Fire Alarm Control Panel. It has a unique drift compensation feature detector adjusts its normal reference based on environment conditions. 

UL listed.  O Dual LED’s for 360 visibility. Advanced detection and communication protocol. Easy installation and maintenance. Sleek low-profile housing design. Regular 100mm base. Address setting by 8 digit DIP switch.

The RE-737M Manual Call Point complies with latest standards and is designed to interface with addressable fire alarm panel. The RED blinking LED indicates normal operating condition. Activation of MCP is indicated by RED steady LED.


Features:
Complies EN54-11. ?Type “A” Indoor Use ?Resettable by an element kit. ?Suitable for flush or surface mounting ?Inbuilt - Isolator ?Soft Addressing using programming tool. Low Standby Current. 

The Avani-RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. It repeats all the indications of FACP in standalone or in network Panel. It has (40X4) 160 character LCD Display. This repeater is connected to Avani FACP using RS 485 communication network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel. The display parameters can be selected individually to suit the requirement of each remote area. 

Ravel Moniti Addressable Fire Alarm Panel
Fire Alarm control Panel

Operates on 120 to 220VAC, 60 / 50 Hz, 120W. ?Battery Backup 24V DC with built in charger. ?40 x 4 characters LCD display. ?Loop with Class A or Class B wiring. ?Maximum 127 Devices exclusive of 20 Loop Sounder. ?Upto 192 Grouping Facility. ?Device / Detector wise configuration facility. ?2000 Event with Real Time Clock. ?USB 2.0 Interface for PC connectivity. ?Two Programmable Form C potential free relays (Fire, Pre - Alarm & Supervisory). ?One Form C Potential free relay for Fault. ?24V DC output. ?One Supervised Notification Appliance Circuit.(NAC) RS 485 Connectivity for repeater

The RE-717M Manual Call Point is compliant with latest standards and is designed to interface with Ravel addressable fire alarm panel, Avani. DIP switches are provided for addressing of the call point. The RED blinking LED indicates normal operating condition. Activation of MCP is indicated by RED steady LED

The RE 337H addressable detectors are designed to work with Avani Panel. O These detectors are low profile and have dual LED’s for 360 visual indication. The LED’s are blinking in normal operating condition whereas the steady state indicates fire status. Detector addressing is electronically programmed into the detector at the time of installation. RE 337H is a fixed cum rate of rise heat detector using a thermistor. O These detectors will raise an alarm when the detector reaches 59 C(Fixed) O or when the change in temperature exceeds the rate of rise of 11 C / min.

The RE-517RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. This repeater is an active repeater with full indication and controls of main FACP. This repeater is connected to Avani FACP using RS 485 communication network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel. The display parameters can be selected individually to suit the requirement of each remote area. 

RE-717MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The Monitor circuit is supervised for faulty condition.

RE-717MC Control Module is the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The output circuit is supervised for faulty condition. 

The RE-24ES is an addressable loop sounder is designed to be connected to analogue addressable Fire Alarm Systems. And these loop powered sounder should be connected to the compatible control panel. The RE-24ES loop powered sounder base receives their power from analogue addressable communication loop and it is controlled via ravel protocol communication. The address of these device should be in the range of 128 to 147 addresses and it shall be set by programming tool or through the Panel. It can be flush / ceiling mounting with / without back box.


Loop powered Sounder ?Addressing by soft addressing tool. ?Low Standby Current. ?Inbuilt Isolator. ?Slim and Sleek ?Wall or Ceiling mountable ?8 Different tone selection using 4 way DIP switch Loop Powered Sounder with Back Box