Accruepole Private Limited

I-9102 Intelligent Photoelectric Smoke Detector is an addressable fire alarm device cooperating with GST intelligent fire alarm control panels to build a fire detection system. It shows fire alarm by LED indicators and transmits the fire signal to the control panel. Using infrared scattering technology, the smoke density can be detected. The detector receives very weak infrared light under normal smokeless condition. If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will alarm out. In order to reduce interference and power consumption, the emitting circuit works in pulse mode to prolong the life of IR LED

Features

 Electronically addressed. The address can be modified in field.  Alarm by pressing, reset by a special key.  Plug-in structure.  Standard: UL38.

Description

Connecting to the loop of GST fire alarm system, DI-M9204 Digital Manual Call Point (MCP) is suitable for public places. When there is a fire, pressing the frangible element on this MCP can send fire signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound. 

Features  Twin LED for 360°view.  Electronically addressed in field.  Built-in microprocessor stores 14 history data.  Drift compensation to suit environment changing extensively.  Self-diagnostic.  Remote indicator output available.  Complies with EN 54-7 standard.

Features

 Address can be set in field.  Fault self-diagnostic.  Rate of rise and fixed temperature, and fixed temperature programmable  Reed switch testing.  Output terminal for remote indicator available.  Complying with UL 521.  Polling LED can be set to OFF.

Description

DI-9103E Intelligent Rate of Rise and Fixed Temperature Heat Detector (the detector) is a new addressable fire alarm device cooperating with GST intelligent fire alarm control panels (FACP) to build a fire detection system. The detector shows fire condition by LED indicator and transmits alarm signals to the FACP. 

Features

 Providing 16 tones.  Using ultra bright LEDs as source for light indication. Optional transparent colorless lens (C-94WL) available.  Loop powered or external 24V powered.  Power-saving consumption mode and normal consumption mode (factory default).  Single/dual address programmable.  Working modes: sounder & strobe / strobe only / sounder only.  Standard: EN 54-3.

Description

I-9403 Intelligent Sounder Strobe is an audible and visual alarm device installed in field, which can be activated by fire alarm control panel in fire control center. After activated, it will generate strong audible and visual alarm signal to warn people in field. A 25.5mm high shallow base and a 40mm high deep base are available. The sounder strobe comes with the shallow base. The deep base C-94DB should be ordered separately. Unless otherwise stated, all descriptions in this manual take the shallow base as example